Printer testing for TPU Air

[brainomite]

Hey all,

We have a

• PETG test - the Test Print| The EVERYTHING tester formerly the toaster
• TPU95 test - the * TPU lap strap formerly a longer strap

But what about printing with TPU air? Also, what hardness should we aim for (i.e. printing temp)?
I wouldn’t want to print an entire cusion just to find out i have issues.

[MakeGood_Noam]

Since TPU air isn’t necessarily REQUIRED we don’t want that to block people from making the chair. If you look at the instructions we ask to print at the softest setting possible with around 10% infill