I’m trying to print the Storage Left (D1) file on Bambu H2S. It’s giving me a 5 day print time, which I know is not correct as we printed the Right in about 11 hours. It’s a simple set-up in the Bambu slicer; simply added supports. I’ve tried everything from restarting the program to re-uploading a fresh file and can’t figure out why I’m getting 5 day time to print. I’ve also tried the file in Orca Slicer and Creality and get about 12 hour prints. Any ideas?
Have you tried reopening the file from the print profile on makerworld? That will make sure its opening with all the correct settings from @MakeGood_Noam
Hi, I tried a fresh uploaded file from the STL google drive folder; didn’t try Makerworld… but I just noticed that all files we try in Bambu slicer is dramatically increasing print time so I’m going to reinstall the slicer. Stay tuned 
1 Like
Material type can make a massive difference. If you aren’t already, try telling the printer you have bambu Petg and make sure your nozzle selection is correct. I’ve printed school house spools as generic, bambu basic and bambu HF…all work fine and the time difference is significant, but not days
1 Like
Update: Reinstalled Bambu Studio and all is fine.
2 Likes