It’s only .25mm so either way should be ok
I’m hammering more than gently right now 
Edit: The second one slipped right in
Same. Or at least I was. Just talked to Noam. They are making the update today!
1 Like
I’ve tapped with a rubber mallet as far as I can, and get slightly more than gentle taps with a 16oz hammer until it gets flush. You do have to be patient or it will for sure crack. but I’ve successfully seated 3 pairs this way now with the new kits.
1 Like
Just talked to Noam. He is working on the modifications right now!
3 Likes
Thank goodness! I was driving myself batty with the mismatch!
I’m chomping at the bit for this! Any progress on the clearance issue?
I talked to him yesterday evening and he said he was testing one or 2 other things and would be putting it out today most likely! I will ask him if I can post the file here so you can at least throw it in BS and print it. Just make sure you orientate it the same way as the old ones and do the same wall/infill settings.
1 Like
ive updated the step and stl files in the public tmt folder - working on the combined profiles now
4 Likes
Makerworld Files have been updated!
2 Likes