Following the manual to build the TMT, there is no clear distinction between all my straps, the diagram for example says “harness strap short” which ones are the harness straps?
1 Like
If you have the complete chair open in Bambu studio. On the plate with all the straps, you can click on each individual part and at the bottom right it will give you the name for it. That’s how I figured it out. The harness strap short is by far the shortest strap of all of them. The 2 medium straps are exactly the same as the 2 foot straps. And I think the longer of the 2 big straps is for the back, and the one an inch or so shorter is for the lap.
1 Like
| 21 | Footrest Strap | 2 | 2cm x 48cm w/hole |
|---|---|---|---|
| 21 | Harness Strap Long | 1 | 19.5 mm x 107.5cm |
| 21 | Harness Strap Short | 1 | 2cm x 20.5 cm w/hole |
| 21 | Harness Strap Medium | 2 | 2cm x 48cm w/hole |
| 21 | Lap Strap | 1 | 3cm x 107.5cm |
| 21 | Storage Strap | 1 | 3cm x 104.5cm |
I measured them as I took them off the plate. I believe the lap strap is just a little longer, but I could be wrong. They are so close they should make them the same for V2.
4 Likes
I’ve been doing the Lap and Storage Strap backwards. I really dont think it will make much difference either way. But I will get it right on #6 lol
1 Like
This is great, thanks all
2 Likes
I was looking for this as well, some type of clear definition would definitely be of value in this process.
1 Like
Lap strap and storage strap were supposed to be the same length. Not sure what happened but not really a big deal
1 Like